BOSS Crenelated Stainless Bezel

BOSS Crenelated Stainless Bezel

Product Information

TorchLAB BOSS - Crenelated Stainless Bezel

Protect your BOSS and E head with our solid steel crenelated bezel. Alternating 3+3 pattern for maximum impact. Choose complimntary or contrasting color.

Installation:

  1. Wrenches recommended for tight fit and removal
  2. Remove head from body
  3. Clean head of oils and dirt
  4. Place tools over the head (hold open slightly)
  5. Align tools near seam between top and bottom
  6. Squeezing both handles, rotate tools left/top, right/bottom
  7. Remove tools and hand open heatsink from bezel ring
  8. Clean off debris from threads
  9. Transfer oring/lens/oring to new bezel (if needed)
  10. Hand tighten heatsink and bezel ring
  11. Place tools over head (hold open slightly)
  12. Align tools nearest to seams
  13. Squeezing both handles, rotate tools right/top, left/bottom
  14. Release pressure and remove tools
  15. Check for fit/alignment, tighten more as needed

 

Options:

  • 0. remove oring/lens/oring sandwitch from current bezel
  • 1. two new orings, move lens over + change to black (no GID)
  • 2. fully assembled and ready to screw on, with black (no GID)
  • 3. fully assembled and ready to screw on, with GID

 

Finishes:

  • BOSS clips and this bezel are both stainless steel and match each other when both are silver or both are AlTiN
  • These in silver are darker than satin silver aluminum
  • Silver finish matches closest to original 7075 patin
  • AlTiN is not solid black and is a match for AlTiN clips
  • AlTiN finish matches closest to black and vintage finishes

 

 

This item is made in


 Engineering - Tom
Machining
- Scott
QC/Logistics - Dan

 


Product Options:

Config
Finish

Product Code: TL-BossCren

Quantity: Add to Basket


Copyright 2010-2016 by OVEREADY, Inc.

SureFire(R) is a Registered Trademark of SureFire, LLC. The use of the Surefire(R) trademark, a registered
trademark of SureFire, LLC, is strictly for the purpose of identifying the host flashlight advertised
on this website. SureFire, LLC, which manufactures and sells Surefire(R) flashlights is not associated
in any way, form or fashion with OVEREADY, Inc. SureFire, LLC, does not sponsor, warrant, or endorse
any modified or customized products advertised on this website. Modifications and upgrades made by
OVEREADY, Inc. may void some or all of the SureFire(R) original manufacturers warranties.

All other trademarks, copyrights, and graphics or text not owned by OVEREADY, Inc. or any of its related
companies that appear on this site are the property of their respective owners, who may or may not be
affiliated with, connected to, or sponsored by OVEREADY, Inc.