Malkoff M61L (cool/neutral/warm) - Single Level Drop In (3.4 - 9.0V)

Product Information

Malkoff M61L Drop In for P60/VME Applications

Balanced between throw and spill the Malkoff M61L gives maximum output in your G series setup. Our neutral tint is closest to white in color.

Cree XP-G LED
Approximately 175 lumens (cool version)
Orange peel reflector designed by Don McLeish (maker of the McClicky switch)
Fully regulated output between 3.4 and 9.0 volts
Below 3.4v it drops out of regulation and continues running until about 3v
Full output runtime is approximately 5 hours on two CR123 primary batteries
93% efficient driver with 2 lithium ion cells
Long taper as voltage drops
Current draw of 300ma at 6 volts
Solid brass heatsink construction
Fits SureFire 6P, 6Z, C2, M2 and G2 flashlights.

Wish there was an M61FL? Check out our Flood Lens option

Color Options

Traditionally, Malkoff 60L and 61L's have been cool, while W's (warm) have been closer to neutral. Gene has moved all W's to XPG high CRI warm, leaving a gap between cool and warm. To fill this gap, OVEREADY has requested a custom M61NL, providing 3 tint options:

M61L - cool (same as the previous cool)

M61NL - neutral (never before available - about 4000k)

M61WL - warm/high CRI (warmer than previous warms)

POWER SUPPLY OPTIONS:

This drop-in runs on 1, but is optimized for 2 rechargeable cells
It will give full output on 2 cells until your cells are completely discharged

On 1 cell, it will run most of the way in regulated, then 'drop out' into a long continuous dimming

^{This item is made in}