Moddoolar L1 Triple Head - Natural HA

Product Information

Moddoolar 1100 Lumen Triple Head

Control the Dark. Simplicity, performance, reliablitiy - in one tiny package.

Advantages:

Shock isolated UCL glass lens (window)
Ribbed and grooved for grip and heat management
Integrated 304 grade stainless steel protective bezel ring
Body + Head + Tail vs Bezel + Drop in + Throat + Body + Tail
3/8 inch shorter than comparable 18mm P60 based setups:

Design:

Fully regulated output between 4.8 and 9.5 volts
Below 4.8v it drops out of regulation and continues running until about 3v
93% efficient driver with 2 lithium ion cells
Integrated thermal overheating protection at 120C (248F)
Multiple independent LEDs for more output than single LED designs (even at the same wattage)

Construction:

Hard anodized finish for superior thermal emissivity and durability
Shock and vibration tolerant materials and components
Heavy duty positive contact spring
Solid brass negative contact ring
Shock proof materials, components, and design
22 gauge mil-spec wire with 19 strand, silver-plated copper conductors, teflon insulated

Configurations:

700/800 lumens (neutral/cool):

TL34 with 1x18350
TL50 with 1x18500
TL65 with 1x18650

1000/1100 lumens (neutral/cool):

TL65 with 2x18350
TL100 with 2x18500
TL130 with 2x18650

Recommended Switches:

Surefire Z41 with SF Twisty or Zero Rez or McClicky
Moddoolar Triad with SF Twisty or Zero Rez or McClicky
Zero Rez does not increase output
McClicky's should be HARDpress with unsheltered boot (ie, Z41)

CAUTIONS:

Do not leave unattended while running on high
Do not run primary CR123 on high (100%). The boost driver will drain them harder and harder until the cells overheat, and may explode.
This light creates excessive heat
This light may cause eye damage
This light may burn the skin at close range
This light may cause combustibles to ignite
This light is not a toy, keep away from children

MODELS:

Name       Voltage 2cell (1cell)*        Modes       Tint
Triple/Mod L1c        1-2 cells    1100L (800L)    High only    Cool
Triple/Mod L1n        1-2 cells    1000L (700L)        High only    Neutral

* Lumen outputs are LED rated values based on power, out the front values will be less

Universal Name Key: LEDcount / Format [space] Power Modes Tint
(not all options available on all models or formats)

LEDcount: 1 (single) or 3 (triple)
Format: 60 (drop in) or Mod (head)
Power: L (low) or H (high) or D (direct drive)
Modes: 1 (high) or 3 (high, medium, low)
Tint: C (cool) or N (neutral)