BOSS FT Clicky Distressed Aluminum 35

Description

Includes one v5.1 head and a 35 body with clip.

Control the Dark with the TorchLAB Bright Output Small Size (BOSS). More light, more strength, less size, less weight, retro-future styling. The ultimate in EDC convenience, comfort, and power. 7075 Aerospace Aluminum finished with a pewter like grain.

Choice of Secondary Color:

+ Colors	Red	Amber
Brightness	Good	Best
Protecting Dark Vision	Best	Good
Sleep Protection	Best	Best
Ideal Environment	Rural	Urban

BOSS 7075 Weights and Measures (no cells)

BOSS Construction:

• Carved from solid 7075 Structural Aerospace Aluminum
• V5 Triple engine with thermally-enhanced metal core PCB
• Triad tail shape for both tail standing and easy thumb access
• Tapered body for superb grip and directional awareness
• Longitudinal channels and divots for rotational traction
• Secure carry with extra thick AlTiN coated stainless steel pocket clip
• Custom T10 extra thick AlTiN coated titanium screws
• McClicky switch with sheltered medium-press boot
• Solid brass electrical contact surfaces
• Acme threads with extra tall thread wall
• Hydrogenated nitrile butadiene rubber primary o-ring
• Shock isolated UCL glass lens
• Self-charging glow-in-the-dark flashlight locator ring
• Battery protection with double spring cell isolation
• Switch protecting battery bumpers for extreme shocks
• Shock and vibration tolerant materials and components

 

Metal components made in the USA.	Electronics made in Russia.
Design & CAD	Tom
Engineering	Tom
Machining	Scott
Electronics	Serge
Logistics	Dan

Programmable Board Features:

1. 0.18 lumen low: (weeks of candle bright runtime)
2. 3500 lumen high: near 20,000x higher higher high than lowest low
3. Battery swap mode groups (independent 1 and 2 cell modes)
4. As few as 1 mode per group (1+1) and up to 4 per group (4+4)
5. Program modes from among 33 white levels plus red (3+1 LEDs)
6. SOS, strobe, and beacon (defaults are off).
   Beacon can be red or white with adjustable timing
7. Mode memory: Off – On – Hybrid (default is off)
   Hybrid stores the last mode but cycles from mode 1 on the next change
8. Battery stretch starts reducing output at 3.2v, down to 0.5w (default on)
   Until over-discharge protection kicks in at 2.8v (default is on)
9. Bounce protection switches to red when too much light is reflected
   It also gives you direct access to red, as a 9th (4+4+1) mode (default off)
10. Supports 1x ICR/IMR, 2x ICR/IMR, 2x CR123 (CR123 selected in advance)
    CR123 reduces output, changes stretch to 2.25v, & disables over-discharge
11. CR123 can be used in emergencies without advanced programming.
    Just limit use to RDLM modes (levels 22 and 25 – under 5 watts per cell)
12. Change temperature ceiling: 65C > 60C > 55C > 50C > 45C > 40C > 35C > 30C

Universal Board Features:

1. Custom high efficiency boost driver and board
2. Per cell battery voltage blink out (111 PIN)
3. Serial number blink out with specs and firmware history (222 PIN)
4. Dual light channels, 30w (3x white) + 7ma (1x red or amber)
5. No PWM – sound and flicker free operation at all power levels
6. Input voltage range from 2.5v to 8.8v (1-2 cells)
7. Fully qualified between -40 and 248F (-40 and 120C)
8. Reversed battery polarity protection
9. Under and over voltage protection (2.5/8.8v)
10. Adaptive temperature control (reduces output only 1/33rd as needed)
11. Integrated thermal safety protection at 65C (149F)
12. Integrated thermal overheating protection at 120C (248F)
13. Shock proof materials, components, and design

Performance:

MODELS

Model:	BOSS 35	BOSS 70	BOSS 70
LED:	XPL	XPL	XPL
Battery:	one 18350	one 18650/3000	two 18350
H level:	17w u2013 1900L3	17w u2013 1900L3	30w u2013 3500L3
H runtime:	20+ min typical4	75+ min typical4	20+ min typical4

1 CELL

NAME:	LETTER	LEVEL #	POWER	MILIWATTS	LUMENS
Red:	R			6
Dim:	D	1	0.005%	1.5	0.18
Low:	L	14	0.6%	180	20
Medium:	M	21	10%	3000	346
High:	H	28	55%	17000	1933

2 CELL

NAME:	LETTER	LEVEL #	POWER	MILIWATTS	LUMENS
Red:	R			6
Dim:	D	1	0.005%	1.5	0.18
Low:	L	16	1.4%	400	46
Medium:	M	24	22%	6500	758
High:	H	33	100%	30000	3498

1. TorchLAB BOSS decides its own max output every time you use its output is controlled in real time by temperature and voltage monitors
   the hotter the environment and less the airflow, the lower the output and the longer the runtime. the colder the environment and the more the airflow, the higher the output and the shorter your runtime
2. values for initial settings, channels can be changed or disabled values are for XPL, 219B values are less (21w max)
3. lumens rated from the LED, at 25C. OTF will be less
4. stretch and battery protection turned on, see FG for more examples

Battery Notes:

• Do not use CR123 above Medium (10% on one cell, 22% on two)
• IMR/INR recommended – use only cells rated above 6 amps
• Stretch mode on and recommended for end of runtime taper

CAUTIONS

• Do not leave unattended while running on high
  
• IMR 18350 are recommended minimum
• INR 18650 are also recommended with longer bodies
• This light creates excessive heat
• This light may cause eye damage
• This light may burn the skin at close range
• This light may cause combustibles to ignite
• This light is not a toy, keep away from children