Triple v5.1 E/Scout Head – XPL 4000K (Neutral) + Amber

Description

Control the Dark with the TorchLAB Triple v5 E35 and Scout head. A BOSS head, with smaller threading for all your Surefire E series applications. 7075 aluminum covered in a stunning satin-black hard anodized finish. And only 27g!

18650 / 18350 / 16340 supporting 6+ continuous amps are recommended for full power. 2xCR123 are also supported (up to level 25) with this configuration.

Construction:

• Lightweight 7075 structural aerospace aluminum
• V5 Triple engine with thermally-enhanced metal core PCB
• Shock and vibration tolerant materials and components
• Solid brass electrical contact surfaces
• Shock isolated UCL glass lens
• Self charging glow-in-the-dark flashlight locator ring

This product is made in the USA.

Programmable Board Features:

1. Four mode pages with independent modes, levels and pin settings (4 PIN)
2. 4+4 battery count switching or 8 sequential modes per page (334 PIN)
3. Double click (337 PIN) with choice between final mode and previous mode (336 PIN)
4. 0.18 lumen low: (weeks of candle bright runtime)
5. 3500 lumen high: near 20,000x higher higher high than lowest low
6. Program modes from among 33 white levels plus red (3+1 LEDs)
7. SOS, strobe, and beacon (defaults are off).
   Beacon can be red or white with adjustable timing
8. Mode memory: Off – On – Hybrid (default is off)
   Hybrid stores the last mode but cycles from mode 1 on the next change
9. Battery stretch starts reducing output at 3.2v, down to 0.5w (default on)
   Until over-discharge protection kicks in at 2.8v (default is on)
10. Bounce protection switches to red when too much light is reflected
    It also gives you direct access to red, as a 9th (4+4+1) mode (default off)
11. Supports 1x ICR/IMR, 2x ICR/IMR, 2x CR123 (2x CR123 selected in advance)
    2x CR123 mode reduces output, changes stretch to 2.25v, & disables over-discharge
12. CR123 can be used in emergencies without advanced programming.
    Just limit use to RDLM modes (levels 22 and 25 – under 5 watts per cell)
13. Change temperature ceiling: 65C > 60C > 55C > 50C > 45C > 40C > 35C > 30C

Universal Board Features:

1. Custom high efficiency boost driver and board
2. Per cell battery voltage blink out (111 PIN)
3. Battery load test with 5 star rating (113 PIN)
4. Serial number blink out with specs and firmware history (112 & 222 PINs)
5. Dual light channels, 30w (3x white) + 7ma (1x red or amber)
6. No PWM – sound and flicker free operation at all power levels
7. Input voltage range from 2.5v to 8.8v (1-2 cells)
8. Fully qualified between -40 and 248F (-40 and 120C)
9. Reversed battery polarity protection
10. Under and over voltage protection (2.5/8.8v)
11. Adaptive temperature control (reduces output only 1/33rd as needed)
12. Integrated thermal safety protection at 65C (149F)
13. Integrated thermal overheating protection at 120C (248F)
14. Shock proof materials, components, and design

Performance:

MODELS

1 CELL

2 CELL

1. TorchLAB BOSS decides its own max output. Every use its output is controlled in real time by temperature and voltage monitors
   the hotter the environment and less the airflow, the lower the output and the longer the runtime. the colder the environment and the more the airflow, the higher the output and the shorter your runtime
2. values for initial settings, channels can be changed or disabled (values are for XPL, 219C values are less (24w max))
3. lumens rated from the LED, at 25C. OTF will be less
4. stretch and battery protection turned on, see FG for more examples

CAUTIONS

• Do not leave unattended while running on high
  
• IMR 18350 are recommended minimum
• INR 18650 are also recommended with longer bodies
• This light creates excessive heat
• This light may cause eye damage
• This light may burn the skin at close range
• This light may cause combustibles to ignite
• This light is not a toy, keep away from children